-
As one of the strongest and most impenetrable rigid wire mesh panels fencing system on the market, the Dulok-25™ double wire mesh panel system is a hugely popular perimeter choice when high security is vital.
Featuring two solid steel 8mm horizontal wires welded either side of 6mm vertical wires spaced just 25mm apart, Dulok-25™ double wire fencing is extremely dense and very difficult to cut through. Installation is quick and easy too, with panels fixed to each sturdy steel post using a full length clamp bar and pin hex security screws allowing stepping.
Available in heights up to 6090mm, it’s the ideal choice for data centres, secure units, police stations and Ministry of Defence sites. Dulok-25™ also conforms to BS 1722-14 for open mesh steel wire mesh panels fencing and can be finished in a wide range of polyester powder coated RAL colours; including marine finish.
Enquire Today -
- 200 x 25mm Mesh Apertures
- Anti-cut double wire mesh fence panels
- 25mm vertical apertures
- Full length clamp bar
- Sheardrive Fixings
- Anti-climb
- Wide range of height options (up to 6090mm high)
- Full range of RAL colours available
-
- Industrial and commercial buildings
- Public buildings
- MOD sites
- Police stations and secure units
-
Panels can be stepped as required within the clamp bar system. Where gradients exceed 1:16, it is recommended that taller panels are either part-buried or additional posts are used.
Enquire Today -
The posts are available in a range of lengths to accommodate panel heights and ground conditions. In addition, many variations are available:
- Wall fixing plates, cranked posts or base plated
- Cranked or straight extensions for barbed or razor wire
- Cranked panels
Call us on 0800 074 2861
Email us atinfo@cld-fencing.com
Get in Touch
-
Our welded steel wire mesh fencing panels are either hot dip galvanised only or galvanised and polyester powder-coated. RAL range of colours available.
-
-
Heights
1830, 2030, 2430, 3060, 4060, 4460, 5060, 5460, 6090mm (Fence heights above 2430mm are made up of 2 or more panels)
-
Panel Width
2506mm
-
Mesh Size
200 x 25mm
-
Wire Diameter
6mm verticals, 2 x 8mm horizontals
-
Top Edge Projection
30mm (Can be inverted to give flush edge)
-
Posts
60 x 40mm RHS to 120 x 60mm RHS dependant on height
-
Flat Clamp Bars
40 x 5mm
-
Post Centres
2520mm
-