-
Prove your dedication to the safety of your people and protection of your premises with one of the most secure fencing systems in our entire range. The Securus AC ™ flat panel system features innumerable security features to create a formidable barrier to stop even the most determined criminals and is approved for government use thanks to it being a LPS 1175 SR2 Fencing System.
Panels are made from twin layers of welded steel wire mesh which are attached to one another at primary and secondary posts, with additional joining clamps enhancing rigidity. Stainless steel security bolts also add to the strength of the fencing system, which conforms to BS 1722-14 for open mesh steel panel fences.
Carrying certification to LPS 1175 SR2, Securus AC ™ is proven to withstand sophisticated attacks from mechanical tools. This makes it the ideal choice for all high risk sites, especially when governing bodies dictate a security standard which conforms to global standards.
Enquire Today -
- 76.2mm x 12.5mm Mesh Apertures
- Double layer 358 mesh fencing system BS1722 – 14 Cat 4
- LPS 1775 SR2 Fencing
- Secured by Design
- Approved for Government Use – Please contact CPNI for further information
- High strength rolled post design
- Excellent visibility for CCTV
- Full range of RAL colours available
- Additional security toppings available
-
- Secure units
- High risk sites
- Government projects
- Utility suppliers
-
Panels can be stepped as required on the post system. Where gradients exceed 1:16, it is recommended that taller panels are either part-buried or additional posts are used. Panelscan also be slopped to the following gradients, within the tolerance of the post section.
- 2440mm high 1 in 60
- 3000mm high 1 in 75
-
The posts are available in different lengths to accommodate panel heights and ground conditions.
- Base plated
- Ranked or straight extensions for barbed or razor wire
Call us on 08000742861
Email us atinfo@cld-fencing.com
Get in Touch
-
Our welded steel wire mesh perimeter security fencing panels are galvanised and polyester powder-coated after stringent cleaning and treatment to give a well-adhered coating of 60 microns. Or available as galvanised only which is a high aluminium content galvanising giving four times the life of BS 443. This finish is free of the sharps and irregularities found in the hot dip galvanising process. RAL range of colours available.
-
-
Heights
2440, 3000mm
-
Panel Width
2515mm
-
Mesh Size
76.2 x 12.5mm
-
Wire Diameter
4mm (horizontals and verticals)
-
Top Edge Projection
Nil – wire is flush on all edges
-
Posts
80 x 60mm special flanged section (patent applied for)
-
Corner Posts
80 x 80mm standard RHS section
-
Post Centres
2520mm / 1260mm
-