Telephone 0800 074 2861 Email info@cld-fencing.com

Scroll now
  • Overview
  • Features
  • Applications
  • Sloping Ground
  • Variations
  • There’s high security fencing, and then there’s the Dulok-25 SR1™, which offers industry-leading perimeter protection to premises needing the top level of defence against even the most determined criminals.

    Suitable for the likes of power stations, Ministry of Defence sites and secure units, the double wire welded panel system of Dulok-25 SR1™ is certified to LPS 1175 SR1 Security Ratings, which guarantees to withstand
    basic tool attacks.

    This enhanced version of our Dulok-25™ system features the same style panels with galvanised steel 8mm horizontal wires welded either side of 6mm vertical wires at 25mm wire centres. Panels are fixed to posts using Shear drive security bolts rather than pin hex screws, making removal or vandalism near-impossible.

    Dulok-25 SR1™ is approved by the UK Police’s Secured by Design initiative, as an effective form of crime prevention. You can further improve the level of multi-threat security with any of our range of Active Anti-Intruder topping.

    Enquire Today
    • High security anti-cut 868 double mesh wire panels
    • 25mm Vertical Apertures
    • Full Length Clamp Bar
    • Additional Security Toppings Available
    • LPS 1175 SR1
    • Secured by Design accredited system
    • Full range of RAL colours available
    Enquire Today
    • MOD
    • Data centres
    • Utility suppliers
    • Power stations
    • Police stations and secure units
    Enquire Today
  • Panels can be stepped as required within the clamp bar system. Where gradients exceed 1:16, it is recommended that taller panels are either part-buried or additional posts are used.

    Enquire Today
  • The posts are available in a range of lengths to accommodate panel heights and ground conditions. In addition, many variations are available.

    • Wall fixing plates, cranked posts or base plated
    • Cranked or straight extensions for barbed or razor wire
    • Cranked panels
    Enquire Today
  • Finish
  • Dimensions
  • Downloads
  • BIM MODEL
  • Our welded steel wire mesh fencing panels are either hot dip galvanised only or galvanised and polyester powder-coated. RAL range of colours available.

    • Heights

      2030, 2430, 3030mm

    • Panel Width

      2506mm

    • Mesh Size

      200 x 25mm

    • Wire Diameter

      6mm verticals 2 x 8mm horizontals

    • Top Edge Projection

      30mm (Can be inverted to give flush edge)

    • Posts

      80 x 40 x 2.5mm RHS

    • Corner Posts

      80 x 40 x 2.5mm RHS

    • Post centres

      2520mm

    • Clamping Channel

      40 x 5mm Steel